ciphermethod.com

#!/bin/bash

# raidcheck.sh – Search for SAS1064 or Adaptec AAC-RAID controller and report failed/degraded drives
#
# 20091222 jah – Created by Jamey Hopkins
# 20110511 jah – Added support for more than 1 drive. Still defaults to controller 1.
#                      rm UcliEvt.log
#                      Code/error message cleanup/clarification.

process_mpt-status() {
   ID=`grep Found status.0 | cut -f2 -d= | cut -f1 -d,`
   /usr/sbin/mpt-status -i $ID -s >status.1
   C1=`cat status.1 | grep phys_id | wc -l`
   C2=`cat status.1 | grep phys_id | grep ONLINE | wc -l`
   [ “$C1” = “0” ] && echo “No Drives Found”
   [ “$C1” = “$C2” ] && echo “$C2 of $C1 Drives Are Online”
   #echo “Controller ID=$ID”
  
   if [ $C2 -lt $C1 ]
   then
 echo “ERROR: Failed SAS Drive Found”
        echo “$C2 of $C1 Drives Are ONLINE”
 echo
 exit 2
   fi
}

AACRAID=”0″;SAS1064=”0″

# search for SAS1064 controller
DATA=`/sbin/lspci | grep SAS1064 2>/dev/null`
if [ “$DATA” != “” ]
then
 #echo Process SAS
 SAS1064=”1″
 # check if mptctl module is loaded
 MPT=`/sbin/lsmod | grep mptctl 2>/dev/null`
 [ ! -n “$MPT” ] && echo “mptctl module not loaded”
 /usr/sbin/mpt-status -p >status.0 2>&1
 grep “not found” status.0 >/dev/null
 if [ “$?” = “0” -a ! -n “$MPT” ]
 then
  echo “mpt-status not found in /usr/sbin”
 else
  process_mpt-status
 fi
fi

# search for Adaptec AAC-RAID controller
DATA=`/sbin/lspci | grep AAC-RAID 2>/dev/null`
if [ “$DATA” != “” ]
then
  #echo Process AAC-RAID
 AACRAID=”1″
 STATE=`/usr/StorMan/arcconf getconfig 1 | grep “Logical devices/Failed/Degraded” | cut -f2 -d: | xargs echo`
 #echo state is -${STATE}-
 #STATE=”1/0/1″  # Set STATE for Testing
 STATE2=`echo $STATE | cut -f2 -d’/’`
 STATE3=`echo $STATE | cut -f3 -d’/’`
 if [ “$STATE2” != “0” -o “$STATE3” != “0” ]
 then
  echo “ERROR: AAC-RAID Error – Devices/Failed/Degraded $STATE”
  echo
  exit 2
 else
  echo “AAC-RAID: No Failed or Degraded Drives Found.”
 fi
fi

if [ $SAS1064 = 0 -a $AACRAID = 0 ]
then
 echo “No supported controllers found.”
fi

rm status.0 status.1 >/dev/null 2>&1
rm UcliEvt.log >/dev/null 2>&1

exit 0